Chester Halifax+ Lathe, 630 x 10000
Please contact our Sales Team for pricing: [email protected]. Or Call us Today: 01543 448940
Distance Between Centres: 10000mm
Swing over Bed: 630mm
Manual Lathes
Features:
• Rapid Feed
• Clutch
• Heavy Duty Construction
• Hardened and Ground Guideways
Center Height | 315mm |
Swing over Bed | 630mm |
Distance between Centres | 1000/1500/2000/3000/4000/5000/6000/7000/8000/9000/10000/11000/12000mm |
Swing over Cross Slide | 350mm |
Swing in Gap | 800mm |
Gap Length in front of Face Plate | 300mm |
Cross Slide Travel | 320mm |
Top Slide Travel | 200mm |
Bed |
|
Width | 550mm |
Max. Weight of Work Piece between Centres | 3T |
Headstock |
|
Spindle Nose | D-11 |
Spindle Bore | 105mm (Opt. 130mm) |
Spindle Taper | 120mm, (Opt. 140mm for 130mm Spindle Bore) |
Number of Spindle Speeds | Forward 18 steps |
Range of Spindle Speeds | 7.5-1000rpm |
Tool Section | 30 x 30mm |
Tailstock |
|
Quill Diameter | 100mm |
Quill Travel | 250mm |
Quill Internal Taper | MT6 |
Feeds Range & Gearbox |
|
Longitudinal Feeds | 0.1-24.3mm/r |
Cross Feeds | 0.05-12.15.mm/r |
Metric Threads | 1-240mm (52 steps) |
Imperial Threads | 1-14tpi (26 steps) |
Module Threads | 0.3-120mp (53 steps) |
Diametrical Threads | 1-28dp (24 steps) |
Leadscrew Pitch | 12mm |
Rapid Feed : Longitudinal/Cross | 4000mm/min 2000mm/min |
Motors |
|
Main Motor | 11kW (14.75hp) |
Coolant Pump Motor | 0.125kW (0.17hp) |
Rapid Feed Motor | 1.1kW (1.48hp) |
Weight & Dimensions |
|
Machine Dimensions (3m machine) | 3300/3800/4300/5300/6300/7300/8300/9300/10300/11300/12300/13300/14300 x 1450 x 1540mm |
Net weight (3m machine) | 3500/3800/4200/4900/5600/6300/7000/7700/8400/9100/9800/10500/11200kg |
STANDARD ACCESSORIES
• 3 Jaw Chuck 325mm
• 4 Jaw Chuck 400mm
• Digital Read Out
• LED Machine Lamp
• Cast Iron Base
• Chuck Guard
• Toolpost Guard
• Leadscrew Guard
• Top Slide Feed
• Fixed Steady, 50-230mm
• Travelling Steady, 30-100mm
• Full Length Rear Splash Guard
• Splash Guard behind Carriage
• Coolant System
• Four Way Tool Post
• Reducing Sleeve
• Steel Centre
• Tool Box
• Operation Manual
OPTIONAL ACCESSORIES
• 130mm Spindle Bore
• 3 Jaw chuck 400mm
• Fixed Steady (200–400mm)
• Quick Change Tool post with Tool Holders
• Taper Turning attachment
• Live Centre
• Face Plate
• 15kW Main Motor for 630 model
