Chester CL34 x 760 Lathe
Please contact our Sales Team for pricing: [email protected]. Or Call us Today: 01543 448940
Distance Between Centres: 760mm
Swing over Bed: 342mm
Manual Lathes
A precision metalworking lathe, our CL34 is ideal for workshops.
• All Castings are Properly Stabilised and Stress Relieved.
• Hardened & Ground Bedways
• Extremely Low Noise Level
• Foot Brake
• Wide Bed Ways
• Built-in Coolant Pump
• Forward/Reverse Clutch
Centre Height | 171mm |
Swing over Bed | 342mm |
Distance between Centres | 760mm |
Swing over Cross Slide | 205mm |
Swing in Gap | 512mm |
Gap Width in front of Face Plate | 150mm |
Cross Slide Travel | 180mm |
Top Slide Travel | 100mm |
Bed |
|
Width | 230mm |
Max. Weight of Work Piece in Chuck | 30kg |
Max. Weight of Work Piece between Centres | 150kg |
Headstock |
|
Spindle Nose | D1-4 |
Spindle Bore | 40mm |
Spindle Taper | MT5 |
Number of Spindle Speeds | 8 steps |
Range of Spindle Speeds | 80-2000rpm |
Tool section | 16x16mm |
Tailstock |
|
Quill Diameter | 50mm |
Quill Travel | 112mm |
Quill Internal Taper | MT3 |
Feeds Range and Gearbox |
|
Longitudinal Feeds | 0.05-1.7mm |
Cross Feeds | 0.025-0.85mm |
Metric Threads | 0.2-14mm (39 steps) |
Imperial Threads | 2-72tpi (45 steps) |
Module Threads | 0.3-3.5mp (18 steps) |
Diametrical Threads | 8-44dp (21 steps) |
Leadscrew Pitch | 6mm |
Motors |
|
Main Motor | 2.2kW (3hp) |
Coolant Pump Motor | 0.09kW (0.13hp) |
Weight & Dimensions |
|
Machine Dimensions (L x W x H) | 2000 x 965 x 1900mm |
Net Weight | 850kg |
