Chester CL38 Lathe
Please contact our Sales Team for pricing: [email protected]. Or Call us Today: 01543 448940
Distance Between Centres: 1250mm
Swing over Bed: 387mm
Manual Lathes
Our CL38 is ideal for workshops. With built-in coolant pump and forward/reverse clutch.
• All Castings are Properly Stabilised and Stress Relieved.
• Hardened & Ground Bedways
• Turcite B Coating Between the Bed and Carriage
• Extremely Low Noise Level
• Foot Brake
• Wide Bed Ways to absorb Vibration
• Built-in Coolant Pump
• Forward/Reverse Clutch
| Model | CL38 x 1250 |
| Centre Height | 194mm |
| Swing over Bed | 387mm |
| Distance between Centres | 1250mm |
| Swing over Cross Slide | 238mm |
| Swing in Gap | 610mm |
| Gap Width in Front of Faceplate | 265mm |
| Cross Slide Travel | 235mm |
| Top Slide Travel | 120mm |
| Bed |
|
| Width | 280mm |
| Max. Weight of Work Piece in Chuck | 40kg |
| Max. Weight of Work Piece between centres | 150kg |
| Headstock |
|
| Spindle Nose | D1-6 |
| Spindle Bore | 56mm |
| Spindle Taper | MT6 |
| Number of Spindle Speeds | 16 |
| Range of Spindle Speeds | 25-2000rpm |
| Tool Section | 20x20mm |
| Tailstock |
|
| Quill Diameter | 59mm |
| Quill Travel | 127mm |
| Quill Internal Taper | MT4 |
| Feeds Range and Gearbox |
|
| Longitudinal Feeds | 0.04-1.0mm |
| Cross Feeds | 0.02-0.5mm |
| Metric Threads | 0.2-14mm (39 steps) |
| Imperial Threads | 2-72tpi (45 steps) |
| Module Threads | 0.3-3.5mp (18 steps) |
| Diametrical Threads | 8-44dp (21 steps) |
| Leadscrew Pitch | 6mm |
| Motors |
|
| Main Motor | 5.5kW (7.5hp) |
| Coolant Pump Motor | 0.1kW (0.13hp) |
| Weight and Dimensions |
|
| Dimensions | 2580 x 1120 x 1745mm |
| Net Weight | 1450kg |
Standard Accessories
• 3 Jaw Chuck 9″
• 4 Jaw Chuck 10”
• Digital Read Out
• One Piece Cast Iron Base
• Chuck Guard
• Fixed Toolpost Guard
• Leadscrew Guard
• Fixed Steady
• Travelling Steady
• Full Length Rear Splash Guard
• Coolant System
• Foot Brake
• Four Way Tool Post
• Thread Chasing Dial
• Reducing Sleeve
• Steel Centre
• Toolbox
• Operation Manual
Optional Accessories
• Soft Jaws
• Quick Change Tool Post with Tool Holders
• Taper Turning Attachment
• Tool Post Grinding Attachment
• Live Centre
• Indexable Lathe Tools
• Face Plate
• Drill Chuck & Arbor
• Machine Mounts
• Single Position Micrometer Bed Stop
• 5C Collet Chuck and Collets
• Electro Magnetic 10hp Motor Brake
• Sliding Tool Post Guard
• Deluxe Type Rear Splash Guard with Built-in Work Lamp
