CHESTER H630LA HORIZONTAL MACHINING CENTRE
Please contact our Sales Team for pricing: [email protected]. Or Call us Today: 01543 448940
Spindle Taper: 7/24 No.40
CNC Machining Centres
The Chester twin pallet horizontal machining centres deliver productivity and performance, the key to this is to reduce the non-machining time to enhance the cutting efficiencies.
The range is divided into High Speed and High Performance CNC machines.
The H630LA is the ideal Machining Centre for high performance and productivity.
| Technical Specifications | H-630LA |
| Travel |
| Travel,X/Y/Z | 1000/850/950mm |
| Spindle Center to Pallet Face | 100-950mm |
| Spindle Nose to Pallet Face | 150-1100mm |
| Pallet |
| Pallet Size | 630x630mm |
| Maximum Workpiece | φ1000mm |
| Maximum Pallet Load | 1000kg |
| Maximum Workpiece Height | 1000mm |
| Pallet Surface Configuration | 24-M16 Pitch 125 |
| Pallet Indexing | 1° |
| Spindle |
| Spindle Max.Speed | 10000rpm |
| Low/Hight Gear Variation | 6000rpm |
| Spindle Max.Torque(Standard) | 165Nm |
| Spindle Taper | 7/24 Taper No.40 |
| Spindle Bearing ld | 70mm |
| Spindle Transmission | Direct Couple |
| Feed Rate |
| Max. X/Y/Z Rapid Speed | 32000mm/min |
| Cutting Feed Rate | 1-10000mm/min |
| Job Feed Rate | 1260mm/min |
| Automatic Tool Change (ATC) |
| Type of Tool Shank | ISO40 or BBT-40 |
| Tool Capacity | 60 pc |
| Max.Tool Diameter(without Adjacent Tool) | 80mm(160mm) |
| Max.Tool Length | 450mm |
| Max.Tool Weight | 8kg |
| ATC Changing Time(T to T) | 5sec |
| Tool Selection Method | Fixed Address |
| Automatic Pallet Changer (APC) |
| Number of Pallets | 2 |
| Pallet Changing Type | Rotary Type |
| Time for APC | 0iMF |
| Controller System |
| FANUC | 18i |
| Motor |
|
| Spindle Motor,Power | 22/26kw(29.48/34.84hp) |
| Spindle Motor | 165Nm |
| X/Y/Z/B Axis Motor | 7/7/4/1.6kw(9.38/9.38/5.36/2.14hp) |
| Motor,Hydraulic System | 2.2kw(2.95hp) |
| Motor,Coolant Pump System | 1.6kw(2.14hp) |
| Power Supply |
|
| Power Requirement | 42kva |
| Capacity of Oil/Coolant Tank |
|
| Capacity,Hydraulic System | 60L |
| Capacity,Lubrication System | 4L |
| Capacity,Coolant System | 800L |
| Mechnical Specifications |
|
| Machine Dimensions | 5966x3570x3362mm |
| Weight | 23000kg |
STANDARD ACCESSORIES
• Spindle Rpm 10000rpm
• Spindle Oil Cooling System
• Spindle Air Seal System
• Spindle Direct Transmission
• 3-Axis Roller Linear Rail
• 3-Axis Hollow Ballscrew Cooling System
• Pallet 1 ˚division
• Pallet M16 Fixing Holes
• Splash Ring
• Track Type Chip Conveyer System
• Chip Cart
• Indoor Chip Auger
• Mechanical Oil-coolant Separator
• Overhead Chip Wash-down System
• Dis-type Coolant Separator
• Front Door / Side Door Safety Switch
• Tool Storage Capacity 60T
• Tool Specification BBT
• Tool Specification NO.40
• M30 Automatic Power-off System
• Working Light
• Warm Light
• Electrical Cabin Heat Exchange System
• Fanuc 0iMF
OPTIONAL ACCESSORIES
• 3-Axis Linear Scale System
• 4-Axis Encoder
• Pallet 0.001” Division
• Pallet T-slot
• Spindle Air Blow System
• Coolant Through Spindle
• CE Safety Specifications
• Tool Length Measuring System NC-4S
• Workpiece Measuring System RMP-60
• Tool Breakage Detection(Magazine)
• Tool Specification CAT
• Electrical Cabin Air-condition System
• Fanuc 31i
• Oil Mist Collector Unit
• Rotary Window
